Sustainable Packaging

Packaging is an art, science and technology of protecting the science, art and technology of enclosing or protecting products for distribution and sale. Packaging involves design, evaluation, and production of packages.

Sustainable Packaging is the development of packaging with improved sustainability. It reduces the environmental impact and it involves the process of finding functional, Cost effective and long term support for human and ecological health.

The specific factors for sustainable design of packaging might include the use of renewable resources, minimal materials, energy efficiency, effects on climate and recycling ability.

Rust Treatment & Prevention

Rust is a reaction of water and iron in the presence of oxygen or moisture. Rust is a series of iron oxides which is of porous and easily lets moisture inside and the entire metal will corrode if unnoticed. The rusting is the common term for corrosion. Once the rusting begins it is difficult to put a stop.

Rusting component

There are several methods to prevent rusting,

• The best way to protect metal from rusting is by insulating it properly. So that water and moisture would not penetrate in. This is achieved by applying grease or oil

• By applying rust proof coating materials, emulsion etc.

• Bluing can provide limited resistance to rusting for small steel items.

• Corrosion inhibitors, like gas phase or volatile inhibitors can be used to prevent corrosion in closed systems.

Rust removal

There are highly effective and safe rust removal services that completely recover rusty parts. “Zerust® ICT® 620-RR” is a product that helps restore the rust parts without damaging the surfaces.

For long term prevention up to 2 years, “Zerust® Z-Maxx heavy-duty corrosion preventative grease” can be used. There is a proven rust protection of five years packing the metal part with the thin film using “Zerust® ICT® corrosion inhibiting film“

Injection molding

In an injection molding method molten plastic is injected into a mold at high pressure to get a desired part. The molds are made from steel or aluminium. Injection molding is widely used in automobile industry. The most commonly used thermoplastic materials are polystyrene.

The process cycle

Before the injection of the material to the mold the two halves of the mold must be securely closed in the clamping unit. The clamping unit is hydraulically powered. The plastic material is melted by heat and pressure then injected very quickly into the molds. The injection time can be estimated by the shot volume, injection pressure, and injection power. The molten plastic begins to cool and it will solidify into the desired shape. After sufficient time has passed, the cooled part may be ejected from the mold by the ejection system, which is attached to the rear half of the mold. When the mold is opened, a mechanism is used to push the part out of the mold. Force must be applied to eject the part because during cooling the part shrinks and adheres to the mold.

Injection molding is also used in security custom packaging by integrating RFID technology and packaging. It helps in creating theft-deterring containers that surround assets such DVDs, CDs and Software to create locked barrier.

Quality control inspection

MIL-STD is a military standard is used to achieve standardization objectives by the U.S. Department of Defense. This standardization is useful in defense related objectives, logistics systems and ensuring products meet certain requirements. It is also used by non-Defense government organizations, technical organizations, and industry.

Packaging Services

MIL-I-45208

It is an inspection system and is used when technical requirements required in-process as well as final end item inspection. It is referenced in a contract whenever an inspection of quality specification pertaining to military items sets forth the objectives and essential elements of an inspection system is required for the item. It is also used by packaging companies for commercial shipments.

Packaging Services

Zelogtek,LLC Packaging Services

Business owners are becoming increasingly aware of the effect a good Packaging Services can have on a prospective customer as this is the first impression about the product. There are a number of products available which has to be packed by the manufacturer by approaching the Packaging Company. There is several packaging equipment available for packing materials. Films play a vital role in packaging. Films are available in different forms with different functional properties and they are used for making various products. We should be aware of different packaging products made out of packaging films. Packaging Film products are Industrial Packaging, Packaging Bags, Vacuum Packaging, Electronic Packaging and Insulation Material etc. Printed films are creating new benchmarks in packaging and other functions. The different types of packaging films are barrier films, Bopp films, coated films, co-extruded films, Cpp films, Fiberglass films, Heat Shrink Films. Label films, laminated films.